Analysis of misaligned water-lubricated polymer bearing with axial grooves

Abstract

PurposeThe purpose of this paper is to analyze the lubrication behavior of misaligned water-lubricated polymer bearings with axial grooves.Design/methodology/approachA lubrication model considering journal misalignment, bush deformation and grooves is established. In dynamic analyses of shaft systems, bearings are usually simplified as supporting points. Thus, an approach for solving the equivalent supporting point location is presented. The influence of misalignment angle and groove number on film thickness, hydrodynamic pressure distribution, load-carrying capacity and ESP location is investigated.FindingsAs the misalignment angle increases, the location of the maximum pressure and ESP are shifted toward the down-warping end, and the load-carrying capacity of the bearing decreases. In comparison to the nine-groove bearing, the six grooves bearing has a higher load-carrying capacity and the ESP is located closer to the down-warping end for an equivalent misalignment angle.Practical implicationsThe results of this study can be applied to marine propeller shaft systems and other systems with misaligned bearings.Originality/valueA study on the lubrication behavior of misaligned water-lubricated polymer bearings with axial grooves is of significant interest to the research community.