Abstract
This study aims to analyze the stainless steel micro round tube external threading process for the influence of different outer threading pitches (0.25 mm, 0.4 mm) and outer diameters (Ø1.9, Ø1.94, Ø2). This study also analyzes the effects of different friction factors (0.1, 0.3, 0.5, 0.7, and 0.9) and different tube thicknesses (0.4, 0.45, 0.5, 0.55, and 0.6 mm) on the threading process. This study considers size effect to use corrected material parameters for the microtube to conduct the finite element analysis by DEFORM-3D software. The goal is to understand stainless steel (SUS304) micro round tube threading and the difference by using macro material parameter analysis. The historic forming data from the simulation and experiment of threading processing are presented, and the corresponding stress/strain distribution and thread shape are also calculated. The experiment results are compared to the simulation results to verify the reliability of this analysis method. The result shows that the torque/stress/strain obtained by the modified model is always lower than by Swift’s model. It means that the size effect can be considered to apply on the forming process and provided proper torque to form the external thread of the micro round tube, e.g., the maximum torque of the round die for M2 × 0.25 occurs over the fourth stroke. For the influence of the outer diameter of the micro round tube, the larger diameter induces the larger maximum torque on the round die for M2 × 0.4, but for the smaller pitch of M2 × 0.25, the larger maximum torque is not influenced by the diameter of the tube. When the pitch of the round die is increased, the torque, stress and strain are also increased relatively. As the friction factor and torque between the round die and tube increase, the stress and strain become lower. Changing the tube thickness will not significantly change the torque, the stress, and the strain. These results guide the simulation and experiment of optimized micro round tube threading development and design to reduce cost and increase product quality.
Highlights
Since its development in the 1950s, the screw industry has accumulated decades of manufacturing experience
The results reveal that thethat tubethe thickness in the microtube threadingthreading process does not does not significantly impact the torque of the round die
Size was considered to construct a micro elastic-plastic material model to correct the impact effect was considered to construct a micro elastic-plastic material model to correctofthe downsizing on the micro tube.round
Summary
Since its development in the 1950s, the screw industry has accumulated decades of manufacturing experience. The screw industry has crossed into high-end fields, such as the automotive, aerospace, and construction fields, and maintained its competitive advantage, but many screw and nut vendors have moved towards higher-value fields, such as medical equipment, in recent years. Microforming is the process of using plastic deformation of material to produce millimeterlevel or smaller parts in at least two dimensions. In industrial applications, this process is commonly used for forming processing under the 10 mm scope [1,2]. Microforming processes provide a high-volume production for microparts and contribute a promising approach for manufacturing relevant micro-parts from
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
