Analysis of Malodorous Sulfur Gases and Volatile Organometalloid Compounds in Landfill Gas Emissions Using Capillary Gas Chromatography with Programmed Temperature Vaporization Injection and Atomic Emission Detection

Abstract

Volatile compounds containing Group V and Group VI elements in landfill gases are of concern as a source of toxic pollutants and unpleasant odors. Conventional analytical techniques for these compounds e.g. ICP-MS, ICP-AES are complicated, expensive and time consuming. The use of a simple programmed temperature vaporization injection (PTV) technique coupled to gas chromatography with atomic emission detection (GC-AED) has been successfully demonstrated to identify compounds containing arsenic, antimony, and sulfur in landfill gas. With an adapted PTV injection system (using a combination of a ten-port and a six-port Valco valves), problems associated with AED discharge tube damage due to high carrier gas flow rate during sample loading can be overcome. The gas samples generated from both a laboratory biowaste digester and a domestic landfill site were characterized using these techniques. Large sample gas volumes were adsorbed onto a cooled sorbent trap containing Porapak Q, followed by rapid liberation onto a porous layer open tubular column (PLOT) using programmed thermal desorption. Arsenic and antimony were also detected in the landfill leachate collected from the same landfill site using hydride generation-atomic absorption spectrometry (Hy-AAS). The efficiency of different traps has also been compared.