Abstract
The propagation of laser light in kiwifruit ( Actinidia deliciosa) tissue was measured by backscattering imaging and modelled with the Monte Carlo (MC) method. The parameters of the vision system (8 bit/channel camera, 27.42 μm/pixel resolution) and the laser module (785 nm, 45 mW, Ø1 mm) were utilized in simulation. The required number of the photons was optimized with time-resolved MC model. The injected photon pulse travelled further than the beam radius and the calculated intensity fell below the noise level of the camera within 1 ns time. This short pulse contains 2.49 × 10 8 photons and its application reduced computation load compared to the amount emitted within the integration time of 0.5–8.3 ms. The statistical effects of the optical properties of the tissue, scattering coefficient ( μ s) absorption coefficient ( μ a) and anisotropy factor ( g), on photon flux was evaluated within ±20% range relative to expected mean values of μ a = 0.9 cm −1 and μ s = 40 cm −1. The anisotropy factor was taken into account using the Heyney–Greenstein phase function and was adjusted to g = 0.8 ± 20%. Because individual significance of each optical property was also analysed, scattering ( μ s) and transport corrected reduced scattering coefficients ( μ ′ s = [ 1 − g ] μ s ) must be distinguished. The multi-factor ANOVA test pointed out the highest importance ( p < 0.001) of the anisotropy factor amongst scattering and absorption coefficients. In the kiwi backscattering images, rotation of the intensity profiles was observed as a result of changing anisotropy. The measured and calculated profiles were compared to estimate the anisotropy factor of kiwifruits. Significant difference ( p < 0.01) was found between anisotropy of premium quality and overripe pieces with respect to the fruit texture properties.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have