Abstract
Abstract Low cycle fatigue tests were carried out on 316 L(N) stainless steel at room temperature employing strain amplitudes ranging from ± 0.3 to ±1.0% and a strain rate of 3×10−3s−1. The material showed initial hardening for a few cycles followed by prolonged softening, saturation and final failure. The fatigue life was found to decrease with increase in strain amplitude. The analysis of stable hysteresis loops showed non-Masing behaviour for this material. The elasto-plastic response of the material under cyclic loading was characterized taking into account isotropic and kinematic hardening occurring during cycling. The material parameters were obtained from the experimental hysteresis loops and cyclic stress response of the material. Finite element analysis of elasto-plastic deformation was carried out to obtain the stabilized hysteresis loop and cyclic stress response of the material. The predicted hysteresis loops showed good agreement with experimental results. The low cycle fatigue life prediction was carried out based on plastic strain energy dissipation with cycling.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
