Analysis of heat transfer characteristics with triangular cut twisted tape (TCTT) and circular cut twisted tape (CCTT) inserts

Abstract

Abstract The paper represents the numerical investigation of heat transfer characteristics in a pipe provided with twisted tape inserts is analyzed. The heat transfer was analyzed in a swirling flow conditions using CFD simulation. A commercial CFD package was used for analyze twisted tape for circular tube fitted with triangular cut twisted tape and circular hole cut twisted tape inserts. The twisted tape system allows a significant increase of convective heat transfer coefficient by introducing the swirl flow motion. The swirl flow motion provides greater heat transfer rate extracted from the solid surface of the tube. The depth of cuts for triangular cut 5 mm and depth of hole cut 5 mm twisted tapes were used for simulation generation. In this paper CFD analysis was used for enhancement of heat transfer rate of fluid of laminar flow. The experimental investigation were conducted in double pipe heat exchanger and these value of plain twisted tape, triangular twisted tape and circular hole cit twisted tape were taken for used simulation analysis. The performance of heat transfer rate was enhanced 1.1–1.3 times compared that the plain twisted tape and circular cut twisted tape. The data obtained from the simulation correlations for triangular cut twisted tape and circular hole cut twisted tape; and these data were correlated with plain twisted tape.