Abstract
Analysis of Hard Facing Material Designed for Application on the Forestry Tools
Highlights
IntroductionThe tools used in forestry are not given as much attention as e.g. the tools used in agriculture, in mining and quarrying, in road building and modifying, and so on
The tools used in forestry are not given as much attention as e.g. the tools used in agriculture, in mining and quarrying, in road building and modifying, and so on. They operate in a heterogeneous environment where they are subject to abrasive wear
It can be concluded that the high presence of Fe in the zone of insufficient mixing indirectly confirms the decrease of the hardness recorded in the graph (Fig. 4)
Summary
The tools used in forestry are not given as much attention as e.g. the tools used in agriculture, in mining and quarrying, in road building and modifying, and so on. They operate in a heterogeneous environment where they are subject to abrasive wear. Is generally achieved by technological intervention on the surface in order to qualitatively change the properties of the base material. Such interventions need to be first verified by relevant tests and measurements under laboratory conditions. Those innovations that achieve the best results can be applied to the tools and tested under real working conditions [11]
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Advances in Science and Technology Research Journal
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.