Abstract

To address the accuracy requirements of initial alignment of high-precision inertial navigation systems (INSs), gravity disturbance compensation for INSs based on a spherical harmonic model is investigated herein. First, the horizontal component of gravity disturbance at an alignment point is calculated using the high-resolution Earth Gravity Model EIGEN-6C4 and then compensated to the initial alignment. Subsequently, the self-alignment algorithm of solidified coordinate frame is used to derive the misalignment angle equation of gravity disturbance affecting the initial alignment. Meanwhile, the coupling relationship between the measurement error of an inertial unit and the gravity disturbance is simulated and analyzed. Finally, a laser strapdown inertial navigation system experiment is performed. The simulation result shows that the pitch angle, roll angle, and heading angle errors reduced by $27.41^{\prime \prime }$ , $- 0.37^{\prime \prime }$ , and $6.72^{\prime \prime }$ , respectively, after the gravity disturbance compensation. Experiment result shows that the alignment performance after compensation has been improved and the heading angle error is reduced by $6.76^{\prime \prime }$ . The simulations and experiments results validate the theoretical analysis.

Highlights

  • The inertial navigation system (INS) is widely employed throughout military and civilian platforms owing to its absolute autonomy and high reliability [1]

  • The simulation results demonstrated that the pitch angle, roll angle, and heading angle errors reduced by 27.413, -0.37, and 6.72 after compensation, respectively

  • The calculation result of horizontal gravity disturbance was compensated in the laser strapdown inertial navigation system (SINS)

Read more

Summary

INTRODUCTION

The inertial navigation system (INS) is widely employed throughout military and civilian platforms owing to its absolute autonomy and high reliability [1]. To compensate the GDV for an initial alignment in high-precision INSs and for analyzing the variation in accuracy with compensation, we used a high-resolution SHM to calculate the horizontal gravity disturbance as well as compensated both to the coarse alignment based on solidified coordinate frame and fine alignment in this study. When projecting accelerometer measurements to the ib0 frame, the attitude change of the carrier caused by carrier disturbance can be tracked, which can effectively suppress the shaking disturbance of the carrier

ERROR ANALYSIS OF INITIAL ALIGNMENT CASUED BY
Alignment error caused by φn2
EXPERIMENT ANALYSIS
CONCLUSION
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call