Analysis of GNSS clock prediction performance with different interrupt intervals and application to real-time kinematic precise point positioning

Abstract

Continuous and timely real-time satellite orbit and clock products are mandatory for real-time precise point positioning (RT-PPP). Real-time high-precision satellite orbit and clock products should be predicted within a short time in case of communication delay or connection breakdown in practical applications. For prediction, historical data describing the characteristics of the real-time orbit and clock can be used as the basis for performing the prediction. When historical data are scarce, it is difficult for many existing models to perform precise predictions. In this paper, a linear regression model is used to predict clock products. Seven-day GeoForschungsZentrum (GFZ) final clock products sampled at 30 s are used to analyze the characteristics of GNSS clocks. It is shown that the linear regression model can be used as the prediction model for the satellite clock products. In addition, the accuracy of the clock prediction for different satellites are analyzed using historical data with different periods (such as 2 and 10 epochs). Experimental results show that the accuracy of the clock with the linear regression prediction model using historical data with 10 epochs is 1.0 ns within 900 s. This is higher accuracy than that achieved using historical data of 2 epochs. Finally, the performance analysis for real-time kinematic precise point positioning (PPP) is provided using GFZ final clock prediction results and state space representation (SSR) clock prediction results when communication delay or connection breakdown occur. Experimental results show that the positioning accuracy without prediction is better than that with prediction in general, whether using the final clock product or the SSR clock product. For the final clock product, the positioning accuracy in the north (N), east (E), and up (U) directions is better than 10.0 cm with all visible GNSS satellites with prediction. In comparison, the 3D positioning accuracy of N, E, and U directions with visible GNSS satellites whose prediction accuracy is better than 0.1 ns using historical data of 10 epochs is improved from 15.0 cm to 7.0 cm. For the SSR clock product, the positioning accuracy of N, E, and U directions is better than 12.0 cm with visible GNSS satellites with prediction. In comparison, the 3D positioning accuracy of N, E, and U directions with visible GNSS satellites whose prediction accuracy is better than 0.1 ns using historical data of 10 epochs is improved from 12.0 cm to 9.0 cm.