Analysis of GaN-based HEMTS with AlN buffer layers by using Raman spectroscopy

Abstract

In this paper, AlGaN/GaN HEMTs with an AlN buffer layer were fabricated. Analyses on the crystal quality of the GaN epitaxial layer by Raman spectroscopy have been purposed. By introducing an AlN layer on sapphire substrate, the maximum drain current of the HEMT increased from 481 mA/mm to 522 mA/mm at [Formula: see text] V. Subthreshold slope was reduced from 638.3 mV/decade to 240.9 mV/decade and the electron mobility increased from 1109 cm2 V[Formula: see text]s[Formula: see text] to 1781 cm2 V[Formula: see text]s[Formula: see text]. These results showed that using an AlN buffer layer can improve the crystal quality of the GaN epitaxial layer, thus optimize the device performances of the GaN-based HEMTs.