Analysis Of Fuel Installation System Design At The Enviromental Of Naval Base

Abstract

The fuel installation system is necessary to support the Indonesian Naval ships to carry out operations. The current condition in the field is that Second Fleet Command does not yet have a fuel installation system. So far, to support Indonesian Naval Warship in carrying out operations using Pertamina's fuel installation pipes which are directly distributed from Pertamina's bunker. As a result, the Navy has become very dependent on Pertamina's performance and this is quite an obstacle. Therefore, the author has an idea to design a fuel installation system that must be owned by the Navy, especially in the Second Fleet Command work area. In this final project, the fuel pipe installation system planning is first carried out starting from the bunker, piping, fittings, and support as a support for the installation based on a standard pipe installation design with a flow capacity of 100 kL/hour. The next stage is the calculation of the head which includes the head loss along the pipe due to friction between the fuel and the surface along the pipe and the head loss due to fittings in the installation so that the total head value of the installation will be obtained. In addition to manual calculations, numerical calculations were also carried out using pipe flow expert v5.12 software. The next step is to determine the power required for both pumps and motors to overcome the installation head and flow capacity designed and select the appropriate pump.