Abstract
ABSTRACT A survey disclosed that the disk spindle of the SIECO 450 mounted fireplow has failed frequently. Field tests were conducted to measure the actual strain in the disk spindle using a microcomputer to collect data from strain gages mounted on the spindle. The results disclosed stress levels higher than the yield strength of the spindle. One alternate design would produce stress levels lower than the yield strength, but would require major changes in the spindle housing. Another design retains the original shaft diameter but requires the use of a steel with a yield strength of at least 1000 MPa..
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.