Abstract
Particulate matter (PM) in the context of underground mining results from various operations such as rock drilling and blasting, ore loading, hauling, crushing, dumping, and from diesel exhaust gases as well. These operations result in the formation of fine particles that can accumulate in the lungs of mineworkers. The lung deposited surface area (LDSA) concentration is a variant solution to evaluate potential health impacts. The aim of this study is to analyse PM and LDSA concentrations in the operational workings of the oil shale underground mine. Experimental measurements were carried out by a direct-reading real-time PM monitor, Dusttrak DRX, and a multimetric fine particle detector, Naneous Partector 2, during the loading and dumping processes using the diesel engine loader. Consequently, the analysis was conducted on PM, LDSA, particle surface area concentration (SA), average particle diameter (d), particle number concentration (PNC), and particle mass (PM0.3), producing a few valuable correlation factors. Averaged LDSA was around 1433 μm2/cm3 and reached maximum peaks of 2140 μm2/cm3 during the loading, which was mostly related to diesel exhaust emissions, and within the dumping 730 μm2/cm3 and 1840 μm2/cm3, respectively. At the same time, average PM1 was about 300 μg/ m3 during the loading, but within the dumping peaks, it reached up to 10,900 μg/ m3. During the loading phase, particle diameter ranged from 30 to 90 nm, while during the dumping phase peaks, it varied from 90 to 160 nm. On this basis, a relationship between PNC and particle diameter has been produced to demonstrate an approximate split between diesel particulate matter (DPM) and oil shale dust diameters. This study offers important data on PM and LDSA concentration that can be used for estimating potential exposure to miners at various working operations in the oil shale underground mines, and will be used for air quality control in accordance with establishing toxic aerosol health effects.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.