Abstract
Due to their large specific surface and their abundance, micro and nano particles play an important role in the transport of micropollutants in the environment. Natural particles are usually composed of a mixture of inorganic amorphous or crystalline material (mainly FeOOH, Fe(x)Oy, Mn(x)Oy and clays) and organic material (humics and polysaccharides). They all tend to occur as very small particles (1-1,000 nm in diameter). Most natural amorphous particles are unstable and tend to transform with time towards more crystalline forms, either by aging or possibly, by dissolution and re-crystallization. Such transformations affect the fate of sorbed micropollutants and the scavenging properties are therefore changed. As these entities are sensitive to dehydration (aggregation, changes in the morphology), it is highly important to observe their morphology in their natural environment and understand their composition at the scale of the individual particles. Also for the understanding and optimization of water treatment technologies, the knowledge of the occurrence and behavior of nano-particles is of high importance. Some of the possible particle analysis methods are presented: aggregation processes, biomineralization, bacterial adhesion, biofilms in freshwaters, ferrihydrite as heavy metals remover from storm water. These examples demonstrate the capabilities and focus of the microscopes. Atomic Force Microscopy (AFM) allows to analyze the particles in their own environment, meaning in air or in the water. Thus, native aspects of particles can be observed. As well, forces of interactions between particles or between particles and other surfaces such as membranes will be highly valuable data. Scanning Electron Microscopy (SEM) and for higher lateral resolution, Transmission Electron Microscopy (TEM) allow measurement of the morphology and composition. Especially, TEM coupled with Electron Energy Loss Spectroscopy (TEM-EELS) is a powerful technique for elemental analysis. Finally, general guidelines for the effective use of microscopic techniques are provided.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have