Analysis of effect of fiber orientation on Young’s modulus for unidirectional fiber reinforced composites

Abstract

Young’s modulus of unidirectional glass fiber reinforced polymer (GFRP) composites for wind energy applications were studied using analytical, numerical and experimental methods. In order to explore the effect of fiber orientation angle on the Young’s modulus of composites, from the basic theory of elastic mechanics, a procedure which can be applied to evaluate the elastic stiffness matrix of GFRP composite as an analytical function of fiber orientation angle (from 0° to 90°), was developed. At the same time, different finite element models with inclined glass fiber were developed via the ABAQUS Scripting Interface. Results indicate that Young’s modulus of the composites strongly depends on the fiber orientation angles. A U-shaped dependency of the Young’s modulus of composites on the inclined angle of fiber is found, which agree well with the experimental results. The shear modulus is found to have significant effect on the composites’ Young’s modulus, too. The effect of volume content of glass fiber on the Young’s modulus of composites was investigated. Results indicate the relation between them is nearly linear. The results of the investigation are expected to provide some design guideline for the microstructural optimization of the glass fiber reinforced composites.