Abstract
An ultra-fast pulsed laser for materials processing can obtain submicrometer- to nanometer-sized parts or patterns (precision or accuracy) because the heat cannot diffuse in time for an ultra-fast pulsed duration, and this causes a threshold of ablation in multi-photoabsorption. The optical and thermal effects significantly affect the processing quality of an ultrashort pulsed laser for materials. This study utilizes a Laplace transform method to display the optical and thermal effects on the temperature field and the ablated depth of an ultrashort pulsed laser processing of materials. The results reveal that If an ultrafast pulsed laser-induced heat can keep the irradiated region above the evaporated temperature until the thermal diffusion occurs in the lattice of materials, thermal ablation occurs. The optical ablation can get a better processing quality due to less thermal diffusion. This study theoretically elucidates that the depth of optical ablation approximates the product of an optical absorption length and the logarithm of the ratio of laser fluence to laser fluence threshold. It has also been shown that the optical and thermal ablation, respectively, occur in low and high laser fluence because the optical ablation depends directly on the main source of the incident ultrashort pulsed laser. However, the thermal ablation is determined by the residual heat directly from the incident ultrashort pulsed laser after the optical ablation. The increase rate of the ablated depth per pulse with laser fluence is actually lower at high laser fluences than that at low laser fluences because the thermal ablation using the residual heat directly from the incident ultrashort pulsed laser is governed at high laser fluences. This study will provide the closed-form of a solution that elucidate the direct optical ablation and sequent thermal ablation for the ultra-fast pulsed laser photo-thermal processing.
Highlights
Lasers can be applied in many machinings of materials such as laser heat treatments [1], drilling [2], cutting [3,4,5], welding [6,7,8], hardening process [9], polished surfaces [10], nanometer-scaled processing [11], etc
The ablated depth per pulse versus laser fluence predicted by this study agrees with the data measured by the published paper. Both optical and thermal ablations follow Beer’s exponential law based on optical absorption length and thermal diffusion length, respectively; It has been shown that optical and thermal ablation, respectively, occur in low and high laser fluences because the optical ablation depends on the only main source of the direct incident ultrashort pulsed laser
The thermal ablation is governed by the residual heat of the directly incident ultrashort pulsed laser after the optical ablation
Summary
Lasers can be applied in many machinings of materials such as laser heat treatments [1], drilling [2], cutting [3,4,5], welding [6,7,8], hardening process [9], polished surfaces [10], nanometer-scaled processing [11], etc. For most materials, regardless of metal or nonmetals, the initial penetration of an ultrashort pulsed laser is directly recognized as the stage of optical effects It is considered as the stage of thermal effects that heat starts to diffuse after the transport time of phonons is arrived. The model considering the solid–vapor interface is proposed for the ultrashort pulsed laser ablation of materials [17] The ablation for this second logarithmic regime of higher fluences is due to heat-induced evaporation, which is recognized as thermal ablation. This phenomenon occurs because of the transition from a thermally dominated damage mechanism to one dominated by plasma formation on a time scale that is too short for significant energy transfer to the lattice, in which the material removal is accompanied by a qualitative change in the morphology of the interaction site and essentially no collateral damage [27]
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
