Analysis of Damages in Layered Surrounding Rocks Induced by Blasting During Tunnel Construction

Abstract

A layered rock mass is a special type of geological body. The existence of a bedding surface may lead to a poor cutting effect (over/under-excavation of the surrounding rock), falling of blocks, or collapse, thereby affecting most constructions in areas with such rocks. Given the lack of a proper quantitative analysis method for surrounding rock damages, the construction process of layered surrounding rock tunnels becomes difficult. To address these problems, three types of cut blasting models with single, double, and four holes are studied in this paper. With this, the LS-DYNA program is used to analyze the behaviors of stress wave propagation, crack propagation, and fracture modes, as well as fracture mechanisms of mudstone, sandstone, and layered rock. Using the image processing technology and fractal theory, the fractal dimension change trend and progressive damage evolution behavior of the three types of rocks under different cut blasting conditions are determined. Also determined is the corresponding relationship between the fractal dimension and the rock damage degree. The results indicate that crack initiation, propagation, bifurcation, and fractal dimension evolution are more closely related to the phenomenon where the compression wave is ahead of the tension wave, and the[Formula: see text]incompatible deformation of the bedding under single-hole blasting. Under double-hole and four-hole blasting, the phenomena, such as spalling, bedding crack penetration, and fracture connection between the explosive holes are caused mainly by the effects of stress concentration, reflected tension waves, and stress wave superposition. Moreover, under different blasting conditions, the rocks exhibit a similar progressive damage process, i.e. a rapid increase at first, then a slow rise, and finally a stabilization phase. The dynamic damage degree of the rock exhibits a linear increasing trend under different blasting holes. The study results provide a useful reference for blasting scheme design and optimization of underground engineering projects.