Analysis of critical length measurements for dry snow slab weak-layer shear fracture

Abstract

AbstractSnow slab avalanches primarily release by propagation of shear fractures within thin weak layers under much thicker slabs. In some cases, the weak layer is on the order of 1 mm thick and such fractures may be considered to be a mode II shear fracture at initiation. In the cases analysed in this paper, the weak layer has finite thickness, and slope-normal effects may be present. Field data from >500 snow shear fracture tests are analysed and applied to the problem of weak-layer fracture. The paper contains a detailed analysis using a simple analytical model to estimate the critical length prior to an unstable shear fracture. The model contains the assumption of a finite fracture process zone which may be a significant fraction of the slab depth,D, or the critical length,L, for weak-layer shear fracture. The field results show that theL/Dratio varies from ∼0.1 to just over 2, and the model results are close to the same range. The analysis also shows that both the field and model results forL/Dfollow a Gumbel probability density function. Since the experimental field data contain rate-dependent (viscoelastic) and slope-normal effects, it is imperative to account for these in the model and for snow slab instability evaluation when using test data. Detailed evaluations considering both these effects are given. The applicability of the test data to avalanche release is discussed.