Abstract
Problem statement: Foamed concrete has become most commercial material in construction industry. People in industries were come out with the new mix design of foamed concrete to meet the specification and the requirements needed. Approach: This is because foamed concrete has the possibility as alternative of lightweight concrete for producing intermediate strength capabilities with excellent thermal insulation, freeze-thaw resistance, high-impact resistance and good shock absorption. Results: Currently Standard test to measure the compressive strength of foamed concrete is using standard unconfined compressive test. Several research has been conduct but the compressive strength using standard unconfined compressive test not capture true behavior of foamed concrete because it just achieved only low compressive strength and sample under compression failed due to brittle collapse of the sample. This study was analyzed the comparison between standard compressive test and confined compressive test. The confinement test introduced to prevent sample from brittle collapse. Foamed concrete cylindrical sample has been investigated under the standard compressive test for hard concrete (ASTM-C39). Based on the research, samples are produced under unconfined and confined condition. Analysis has been done and the result show that under standard compressive test, the sample failed due to early crack initiation and failed. Confinement condition was increase the compressive strength but this condition influence the result. Conclusion/Recommendations: Standard test is not suitable to capture the true behavior of foamed concrete, and to prevent the sample from brittle collapse during the test, new testing method was introduced to capture the true behavior of foamed concrete which is using Quasi Static Indentation Test. This test can be used to study about the behavior of foamed concrete before it can be implemented to its final application.
Highlights
Foamed concrete is used widely in construction industries because all community around the world relies on factors as a safe, strong and simple building material
It has defined that foamed concrete is one of the lightweight concrete and it’s referred to cellular material which is consisting of Portland cement, fine sand, water, foaming agent and compressed air (Dolton and Hannah, 2006)
The different between foamed concrete and normal concrete is the use of aggregates in the foamed concrete was eliminated and been replaced by the homogenous cells created by air in the form of small bubble which utilize a stable air cell structure rather than traditional aggregate (Zaidi et al, 2008)
Summary
Foamed concrete is used widely in construction industries because all community around the world relies on factors as a safe, strong and simple building material. Six samples were produced were test using standard compressive load. The purpose is to determine the compressive strength of cylinder foamed concrete (unconfined and confined). Foamed concrete sample will be tested under compressive load to determine the behavior of foamed concrete.
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: American Journal of Engineering and Applied Sciences
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
