Abstract
The excavation of a underground rock mass resulting a change in the balance of rock conditions such as the occurrence of rock collapse and changes in the dimensions of tunnel as a result of the displacement of the voltage distribution. It is desirable to have a good geotechnical analysis to provide an appropriate treatment of rocks excavated. This research was conducted to determine rock mass class, rock strength. Classification of rocks mass with RMR system And Q-System FK potential of wedge using unwedge software. From the measurement of several parameters of RMR method, RMR value of 48 ( Coal) and 60 (Sillstone) is obtained where as rock mass class III (fair rock), based on the Q-System obtained a value of 14 in class II for coal and 4 Class III for Sillstone. Based on the RMR-system classification, the value for span maximum is 3 m with a collapse time of 110 hours and the value of the load collapses is 1,56 tons / m2. Based on the Undwedge Software processing, there was an increase in FK values for both methods, Based on Support RMR Ground from 1,907 to 2,939 and Based on Ground Support Q-System from 1,907 to 2,078.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
