Abstract
ABSTRACT The production practices in Shendong mining area show that the CO concentration at the return air corner of shallow coal seams often exceeds the limit, but the temperature of the residual coal in the goaf has not significantly increased, and no other indicative gas of spontaneous combustion in coal seams has been detected. In order to provide scientific basis for CO management at the return air corner of the fully mechanized mining face in Shendong mining area and the prevention and control of coal seam spontaneous combustion fires, based on the “three zones” distribution parameters of spontaneous combustion of coal in goaf and the characteristic parameters of spontaneous combustion of coal, and based on the mechanism of CO production in shallow buried mining area, the source and influencing factors of CO in working face were analyzed, and the calculation model of CO concentration at the return air corner in working face was established. The concentrations of CO at the return air corner in different working faces in Shendong mining areas were calculated by using the model. The results showed that the relative error between the observed and measured values remained between 0.32% and 6.92%. The quantitative analysis of the proportion of CO production from each source to the total production of CO in the return air corner is of great significance to the effective control of CO concentration in the air return corner of the working face.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
