Analysis of Acoustic Signal Propagation for Reliable Digital Communication along Exposed and Buried Water Pipes

Abstract

Wireless sensor networks (WSN) have emerged as a robust and cost-effective solution for buried pipeline monitoring due to the low cost (a maximum of a few tens of UK pounds (GBP)), low power supply capacity (in the order of 1 watt/hour) and small size (centimetre scale) requirements of the wireless sensor nodes. One of the main challenges for WSN deployment, however, is the limited range of underground data communication between the wireless sensor nodes of less than 3 m, which subsequently increases deployment costs for a utility owner for buried pipeline monitoring. A promising alternative to overcome this limitation is using low-frequency (<1 kHz) acoustic signal propagation along the pipe. This paper examines the feasibility of using low-frequency acoustic signal propagation along exposed and buried medium-density polyethylene (MDPE) pipes and makes predictions of the potential distances at which reliable data communication can be achieved. Quantification of the acoustic attenuation was performed using both analytical and numerical models in addition to laboratory and field experiments. The predicted acoustic data communication distance ranged between approximately 18 m for an exposed and approximately 11 m for a buried MDPE pipe. These results demonstrate the feasibility of using low-frequency acoustic signal propagation for achieving reliable wireless underground communication.