Analysis of a domestic air heat pump integrated with an air-geothermal heat exchanger in real operating conditions: The case study of a single-family building

Abstract

The work presents an in-depth analysis of the real performance of an air heat pump unit installed in a single-family building and quantitatively determines the reduction in energy consumption achieved by the integration of an air-geothermal heat exchanger. The case study is a single-family building located in northern Italy. It is equipped with a heating, ventilation, and air conditioning (HVAC) system consisting of an air-geothermal heat exchanger coupled with a compact air source heat pump supported by an electric heater installed in a thermal storage and devoted to cover the peak demand. The main objectives of the work are to analyse the HVAC performance under real operating conditions compared to the design values and to highlight the existence of factors that affect this performance. The analysis was carried out by developing an accurate model of the heat pump system based on the real operating data acquired by the on-board monitoring system. The results confirmed the influence of the air-inlet conditions (temperature and humidity) and of the control strategy (more specifically, the ventilation flow rate) on the unit performance in both the heating and cooling modes. In particular, the analysis showed that minimising indoor ventilation in the case of low outdoor temperatures is of paramount relevance not only because it reduces the indoor heat demand, but also because it maintains the unit efficiency close to the design values. Furthermore, the installation of a geothermal heat exchanger guarantees a reduction in electricity consumption of approximately 30%.