Abstract
The development of engine waste heat recovery technologies attracts ever increasing interests due to the rising strict policy requirements and environmental concerns. This paper presented the study of engine coolant and exhaust heat recovery using organic Rankine cycle (ORC). Eight working fluids were selected to evaluate and compare the performance of the integrated waste heat recovery system. Rather than the conventional engine ORC system mainly focusing on the utilization of exhaust energy, this work proposed to fully use the engine coolant energy by changing the designed parameters of the ORC system. The case study selected a small engine as the heat source to drive the ORC system using a scroll expander for power production. The evaluation results suggest that under the engine rated condition, the solution to fully recover the engine coolant energy can achieve a higher power generation performance than that of the conventional engine ORC system. The results suggest that adding a recuperator to the ORC system can potentially improve the system performance when the working fluids are dry and the overall dumped heat demand of the system can be reduced by 12% under optimal conditions. When the ORC evaporating and condensing temperature are respectively set at 85°C and 30°C, the integrated engine waste heat recovery system can improve the overall system efficiency by 9.3% with R600, R600a or n-Pentane as the working fluid.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
