Abstract
Mechanical seal is the core component of the servo system. It’s sealing, reliability and wear resistance depend not only on the structural design of the seal, but also on the matching of friction pair materials on the end face of the seal. On the basis of the feasibility study of ion implantation on the surface of the seal ring, a comprehensive test scheme is proposed to verify the friction and wear characteristics of the seal pair. By selecting typical graphite and rotating metal ring pairs to test and test under dry grinding conditions, changing the linear velocity and the end face specific pressure, the friction and wear characteristics of paired friction pairs are compared and analyzed by using friction and wear testing machine, the influence of load and rotational speed on the pair friction coefficient of sealing pair is systematically studied, and the sealing tribological characteristics are revealed. This paper introduces mechanical-seal work reliability of temperature stress and system test performace based seal pair, the application of these plans will provide a reasonable and efficient technical way for the verification of life and reliability test of ultra-high speed mechanical seal.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.