Abstract
A comprehensive analysis of a multistage Doherty amplifier, which can be used to achieve higher efficiency at a lower output power level compared to the classical Doherty amplifier, is presented. Generalized design equations that explain the operation of a three-stage Doherty amplifier, which can be easily extended to an N-stage Doherty amplifier, are derived. In addition, the optimum device periphery, which minimizes AM-AM distortion for perfect Doherty amplifier operation, is analyzed. For the first time, a multistage Doherty power amplifier that meets wide-band code-division multiple-access (WCDMA) requirements is demonstrated. The designed power amplifier exhibits a power-added efficiency (PAE) of 42% at 6-dB output power backoff and 27% at 12-dB output power backoff. These PAEs are more than 2/spl times/ and 7/spl times/ better, respectively, than that of a single-stage linear power amplifier at the same output power backoff levels. The power amplifier is capable of delivering up to 33 dBm of output power, and has a maximum adjacent channel power leakage ratio of -35 and -47 dBc at 5- and 10-MHz offset, respectively. To the best of the authors' knowledge, these represent the best reported results of a Doherty amplifier for WCDMA application in the 1.95-GHz band to date.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IEEE Transactions on Microwave Theory and Techniques
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.