Abstract
In this paper, we analyze the potentials of a four-phase 14-GHz CMOS voltage-controlled oscillator, tailored to a sub-harmonic receiver, for signal processing at Ka-band. When mild phase accuracies between in-phase and quadrature down-converted signals are required, the four-phase oscillator displays roughly the same phase noise figure-of-merit as quadrature oscillator counterparts. However, the operation at half-frequency leads to an improved performance due to a higher quality factor of the tuning varactors, and because the local oscillator circuitry and signal path run at different frequencies, relaxing coupling issues. A detailed time-variant analysis of phase noise in multiphase oscillators is introduced and validated by both simulations and experiments. Prototypes realized in a 65-nm technology occupy an active area of 0.5 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> and show the following performances: a 26% frequency tuning range (from 12.2 to 15.9 GHz), maximum phase error from pi/4 of 2deg, and a phase noise of -110 dBc/Hz at 1 MHz from 14 GHz, while consuming 18 mA from 0.8-V supply.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IEEE Transactions on Microwave Theory and Techniques
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.