Abstract
This article presents a delta–sigma modulator (DSM) using a cascoded floating-inverter-based dynamic amplifier. The proposed cascoded dynamic amplifier achieves more than 50-dB dc gain while maintaining an HD3 of better than –110 dBc for signal swings less than <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$300~\mathrm {mV_{ppd}}$ </tex-math></inline-formula> . Compared to the previously reported two-stage floating inverter amplifier (FIA), the cascoded FIA has a lower and a process invariant input-referred noise, making it an ideal choice for high-resolution ADCs. We also show that, when such a single-stage dynamic amplifier, which has a time-varying transconductance, is used in closed-loop switched-capacitor circuits, the settling bandwidth depends on the average transconductance <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$G_{m,\rm avg}$ </tex-math></inline-formula> during the settling interval. A detailed analysis reveals that, when the floating inverter structure operates in weak inversion for most of the time (which is the power-efficient way to bias the amplifier), this average transconductance depends strongly on the reservoir capacitance value and only weakly on the transistor dimensions. Besides, it is less sensitive to temperature variations, unlike the transconductance of a conventional OTA biased in weak inversion. We also quantitatively derive and show that the cascoded FIA is more power-efficient than a conventional static-current biased operational transconductance amplifier. Using the cascoded FIA, a discrete-time DSM has been designed and fabricated in a 180-nm CMOS process. The modulator runs at 3.072 MHz while consuming 189 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\mu \text{A}$ </tex-math></inline-formula> from a 1.8-V supply. In a bandwidth of 24 kHz, the measured SNR/SNDR/SFDR is 96.4/96.2/114 dB, respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
