Abstract
Fractional-slot concentrated-winding (FSCW) consequent pole (CP) permanent magnet vernier (PMV) machines have received increasing attention due to their less magnet consumption but larger torque capability. However, the PM magnetomotive force (MMF) distribution is asymmetric in the CP structure. Thus, even-order air-gap flux density and back-electromotive force (back-EMF) harmonics are generated, which increases torque ripples. In this paper, to eliminate the even-order back-EMF harmonics and the resulting torque ripples, a comprehensive investigation on even-order flux density and back-EMF harmonics of five-phase FSCW CP PMV machines was presented, and then the general design rules without even-order back-EMF harmonics were summarized. Firstly, considering single- and double-layer windings, the effects of slot/pole number combination and flux modulator distribution on even-order flux density and back-EMF harmonics were analyzed. Secondly, the optimal slot/pole number combinations were selected, and then the rules for eliminating even-order back-EMF harmonics of CP PMV machines were summarized. As an extension, it was revealed that the harmonic elimination mechanism of CP PMV machines is applicable to CP-Halbach PMV machines. According to the summarized general design rules, the five-phase CP and CP-Halbach PMV machines with <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">S</i> =20/ <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">P<sub>r</sub></i> =21/ <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">z<sub>f</sub></i> =10 were proposed. Their detailed performance has been comparatively analyzed and then the optimal one was selected for prototyping. Both finite element analysis (FEA) and experiments were carried out to validate theoretical analyses.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Transportation Electrification
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
