Abstract

Research on the analysis of the reduction of the potential of methane gas (CH4) in the processing of palm oil mill effluent with the method of processing through Biodigester and Conventional ponds. Palm oil mill waste management system PT. The Indo Palm Fertile Core which reduces CH4 by splitting the effluent out of the inlet is divided into 2 lines, each pathway of the system aims to reduce methane gas (CH4) that comes from the degradation of organic matter present in the liquid waste. Sample analysis was taken from 6 palm oil mill waste processing ponds owned by PT. Inti Indosawit Subur Pelalawan. In this study the authors calculated repetition of sampling conducted using the Slovin technique. The measured parameters of wastewater are Biochemical Oxygen Demand (BOD), Chemical Oxygen Demand (COD), pH and temperature in each pond that affects the formation of methane gas and carbon dioxide. Analysis of methane gas is determined in 1 way namely theoretically using equations and using the Biogas 5,000 Gas Analyzer tool. Calculation of methane gas potential (CH4) is carried out to find out how much the potential of methane gas (CH4) in each WWTP pond. From the calculation of the potential emissions of methane gas (CH4) it will be known how much reduction in methane gas (CH4) in the treatment of liquid waste in PKS PT. Inti Indosawit Subur Pelalawan Regency. Results of COD anasis and methane gas potential in biodigesters The average value of COD loading on Biodigester per day in September at the time of sampling was 24,884 kg / day. Potential emissions of methane captured in the Biodigester is 7,838.46 Nm3 / Day. The percentage of potential methane emissions in the Biodigester per day is 31.5%. Whereas the highest methane gas pool was found in pond 3, which is 6.4 Nm3 / day, which was calculated theoretically with a percentage of methane gas emissions of 0.011%. However, if measured using a tool, the percentage of potential methane gas in a 3 COD pool of 58,112 mg / L is 0% at a temperature of 35 ° C and a pH of 8.38. The highest methane gas emissions occur in pond 3 during the daytime with a value of 6.4 Nm3 / Day on the first day, 6.95 Nm3 / Day on the second day, 6.41 Nm3 / Day on the third day and 6.67 Nm3 / Day on the fourth day, the potential emissions of the biodigester have been calculated by the company. The potential of methane emissions captured in Biodigester is 7,838.46 Nm3 / Day with the percentage of potential methane emissions in Biodigester an average of 31.5% per day. The highest value of methane gas emissions during the 4 days of the study was 6.95 Nm3 / day on the second day taken at noon with a pool temperature of 35 ͦ C.

Highlights

  • Research on the analysis of the reduction of the potential of methane gas (CH4) in the processing of palm oil mill effluent with the method of processing through Biodigester and Conventional ponds

  • The Indo Palm Fertile Core which reduces CH4 by splitting the effluent out of the inlet is divided into 2 lines, each pathway of the system aims to reduce methane gas (CH4) that comes from the degradation of organic matter present in the liquid waste

  • The measured parameters of wastewater are Biochemical Oxygen Demand (BOD), Chemical Oxygen Demand (COD), pH and temperature in each pond that affects the formation of methane gas and carbon dioxide

Read more

Summary

METODE PENELITIAN

Objek dalam penelitian ini adalah emisi gas metana yang dipancarkan dari 6 kolam IPAL pada PT. Pada setiap kolam Instalasi Pengolahan Air Limbah dipasang sungkup sebagai tempat penangkapan gas metana (CH4), kemudian sampel gas diambil dengan selang dari alat Biogas 5000. Dalam penelitian ini penulis menghitung pengulangan pengambilan sampel yang dilakukan menggunakan teknik Slovin menurut Sugiyono (2006). Oleh karena jumlah sampel dalam penelitian ini adalah sebanyak 5 kolam IPAL, sehingga presentase kelonggaran yang digunakan adalah 20% dan hasil perhitungan dapat dibulatkan untuk mencapai kesesuaian penelitian. Pengambilan sampel dilakukan pada siang hari pada pukul 12.00 WIB–14.00 WIB dengan cara menangkap gas metana (CH4), Sampel gas diambil dengan menggunakan alat biogas 5000 gas analyzeryang secara otomatis mengukur parameter COD, pH, dan konsentrasi CH4. 6. Catat hasil pembacaan pada tampilan alat pH meter Tahapan Analis Data Analisis COD Analisis COD dilakukan untuk mengetahui nilai COD removal (COD terurai).

Menggunakan flow meter
COD in
HASIL DAN PEMBAHASAN
Suhu pH
Outlet IPAL
Potensi Gas
DAFTAR PUSTAKA
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call