Abstract

In this study, a comparison was made of the attenuation values ​​of passive splitters 1:8 and 1:16 in Optical Distribution Points (ODP). Perform several measurements at the ODP using an Optical Light Source paired with a Passive Splitter 1:4 and 1:8 to become input power at the Optical Distribution Cabinet (ODC) and measure the output from the Passive Splitter 1:8 and Passive Splitter 1:16 at the ODP using Optical Power Meter (OPM) as a measuring tool with a cable length parameter of 100 meters. The measurement results using the OPM are smaller than the calculations with the Power Link Budget, with the measurement results of the passive splitter 1:8 on ODP with measurements made at the rosette obtained attenuation of -19.78 dBm and the results of measurements on passive splitter 1:16 on ODP with measurements carried out in the rosette the attenuation is -23.57, from these results it can be said that the use of passive splitters with excess needs can be used with replacement of passive splitters that have more capacity.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call