Analisa Perbaikan Manajemen Perawatan Dengan Metode Reliability Centered Maintenance Bagian Cnc Wirecut di PT X

Abstract

PT X is one of the manufacturing companies in Indonesia, which specializes in manufacturing molds and dies which offers products to the internal group and the domestic market. This study discusses the policy analysis of machine repair maintenance management using the RCM (Reliability Centered Maintenance) method approach at the PT X manufacturing company. Some of the problems that occur are sudden engine failure, which will cause over production. One machine that is considered critical is the CNC Wirecut K90 machine. With the application of using RCM it is expected to improve machine reliability through several systematic RCM implementations: system selection and information collection, defining system boundaries, system descriptions and function block diagrams, describing system functions and functional failures, compiling Failure Mode and Effect Analysis (FMEA), composing Logic Tree Analysis (LTA), selection of actions. The new policy set by the Realibility Centered Maintenance (RCM) method consists of 14 failure modes that are resolved by time-directed (CD) and 6 failure modes that are overcome by run to failure (RTF). In the FMEA analysis, there are 4 components that most often fail to function, namely the electrode pin, wire guide, filter and contact fit. The determination of this component is based on the RPN value and data in the field. In the RCM analysis, the electrode pin, wie guide and contact fit components are included in the run to failure (RTF) treatment policy category. Meanwhile, the filter component is in the category of condition direction (CD) maintenance policy with an average failure rate of 29,951 days.