Abstract
In desain ing wood profile lathes, the quality and strength are calculated by analyzing various loads that occur in the lathes and choosing suitable materials to be used in the manufacture of lathes, the materials used are 40 X 40 mm hollow beam type A ISI 304 with tensile strength 6 x 108 N / m 2 , mudulus elasticity 1.9 X 1011 N / m 2 , performed to calculate the distribution of the load received by the rangkan of 757 N and done to get the results close to the original as a reference for making the lathe frame duplicate the wood profile. To do the simulation, solidwork software is needed as a means to DESAIN and DESAIN the lathe frame strength duplicate the wood profile. Manual calculation results are compared with finite element analysis (FEA) simulations. S trength analysis in the frame is obtained 3.9 X 10 7 N / mm 2 , the deflection that occurs is 0.08 mm.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
