Analisa Desain, Konsep, dan Karakteristik Sistem Transfer Daya Nirkabel

Ike Yuni Wulandari

doi:10.32672/jse.v5i2.1929

Abstract

<p>In the current era of the industrial revolution 4.0, the need for time, labor, and cost efficiency is a basic requirement for human life, especially regarding electrical energy sources. The supply of commercial electricity is still using electricity cables to deliver electricity to the load. Therefore, one of the ways of sending or transferring electrical power that continues to be developed today is wireless electricity transfer. The wireless transfer of electric power has several advantages compared to the use of cables, which can increase the convenience in the use of electrical equipment and can reduce the amount of electronic waste. This research will study the techniques or methods of near-field wireless energy transfer systems, namely the inductive coupling method, the magnetic resonance coupling method and the capacitive coupling method. The results of this study propose an optimal modeling of wireless power transfer so that results and quality are better, taking into account the distance between the sender and receiver because the work efficiency of wireless power transfer decreases with respect to distance. And the signal transmission frequency is low for inductive coupling, while the resulting frequency will be high on magnetic resonance coupling and capacitive coupling.</p>

Highlights

Abstrak Di era revolusi industri 4.0 saat ini, kebutuhan akan hal efisiensi waktu, tenaga kerja, dan biaya merupakan kebutuhan pokok bagi kehidupan manusia, khususnya yang menyangkut sumber energi listrik
The results of this study propose an optimal modeling of wireless power transfer so that results and quality are better, taking into account the distance between the sender and receiver because the work efficiency of wireless power transfer decreases with respect to distance
Frekuensi sinyal transmisi akan rendah untuk metode kopling induktif, sementara frekuensi yang dihasilkan akan tinggi pada kopling resonansi magnetik dan kopling kapasitif

Summary

Introduction

Abstrak Di era revolusi industri 4.0 saat ini, kebutuhan akan hal efisiensi waktu, tenaga kerja, dan biaya merupakan kebutuhan pokok bagi kehidupan manusia, khususnya yang menyangkut sumber energi listrik. Pada penelitian ini akan dikaji mengenai teknik atau metode sistem transfer daya nirkabel medan dekat (near field), yaitu metode kopling induktif, metode kopling resonansi magnetik dan metode kopling kapasitif. Dan frekuensi sinyal transmisi rendah untuk kopling induktif, sementara frekuensi yang dihasilkan akan tinggi pada kopling resonansi magnetik dan kopling kapasitif.

Results

Conclusion