Abstract
Resource-abundant metal (e.g., zinc) batteries feature intrinsic advantages of safety and sustainability. Their practical feasibility, however, is impeded by the poor reversibility of metal anodes, typically caused by the uncontrollable dendrite enlargement. Significant effort is exerted to completely prevent dendrites from forming, but this seems less effective at high current densities. Herein, this work presents an alternative dendrite regulation strategy of forming tiny, homogeneously distributed, and identical zinc dendrites by facet matching, which effectively avoids undesirable dendrite enlargement. Confirmed by multiscale theoretical screening and characterization, the regularly exposed Cu(111) facets at the ridges of a copper nanowire are capable of such dendrite regulation by forming a low-mismatched Zn(002)/Cu(111) interface. Consequently, reversible zinc electroplating/stripping is achieved at an unprecedentedly high rate of 100mA cm-2 for over 30000 cycles, corresponding to an accumulative areal capacity up to 30 Ah cm-2 . A full cell using this anode shows a high capacity of 308.3 mAh g-1 and a high capacity retention of 91.4% after 800 cycles. This strategy is also viable for magnesium and aluminum anodes, thus opening up a promising and universal avenue toward long-life and high-rate metal anodes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.