Abstract
The pairing of high‐capacity Li2S cathode (1166 mAh g−1) and lithium‐free anode (LFA) provides an unparalleled potential in developing safe and energy‐dense next‐generation secondary batteries. However, the low utilization of the Li2S cathode and the lack of electrolytes compatible to both electrodes are impeding the development. Here, a novel graphite/Li2S battery system, which features a self‐assembled, holey‐Li2S nanoarchitecture and a stable solid electrolyte interface (SEI) on the graphite electrode, is reported. The holey structure on Li2S is beneficial in decomposing Li2S at the first charging process due to the enhanced Li ion extraction and transfer from the Li2S to the electrolyte. In addition, the concentrated dioxolane (DOL)‐rich electrolyte designed lowers the irreversible capacity loss for SEI formation. By using the combined strategies, the graphite/holey‐Li2S battery delivers an ultrahigh discharge capacity of 810 mAh g−1 at 0.1 C (based on the mass of Li2S) and of 714 mAh g−1 at 0.2 C. Moreover, it exhibits a reversible capacity of 300 mAh g−1 after a record lifecycle of 600 cycles at 1 C. These results suggest the great potential of the designed LFA/holey‐Li2S batteries for practical use.
Highlights
The pairing of high-capacity Li2S cathode (1166 mAh g−1) and lithium-free anode (LFA) provides an unparalleled potential in developing safe and energydense next-generation secondary batteries
The high potential barrier represents the difficulty in extracting lithium ion from Li2S,[27] which limits the depth of charging, thereby causing the low Li2S utilization
The low-cost production is highly important for energy storage systems and electric vehicle applications where battery cost reduction is a key driver for their successful implementation
Summary
The pairing of high-capacity Li2S cathode (1166 mAh g−1) and lithium-free anode (LFA) provides an unparalleled potential in developing safe and energydense next-generation secondary batteries. The as-prepared plate-Li2SO4/CNT electrodes are converted to holey-Li2S/CNT electrodes (Figure 1, middle) via a carbothermal reduction centrated electrolyte (5 m LiTFSI in DME) was suggested for lithiated graphite/sulfur batteries.[51] The use of highly concentrated electrolyte is beneficial in reducing the polysulfide reaction under N2 gas at 700 °C for 3 h.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.