Abstract
Conducting polymer nanocomposites have attracted a wide attention in material chemistry and analytical chemistry. In this work, poly(methylene blue) doped silica nanocomposites (PMB@SiO2(nano)) on glassy carbon electrode (GCE) were synthesized based on a two-step electropolymerization. Compared with poly(methylene blue) film, PMB@SiO2(nano) had more advantages in facilitating electron transfer between glucose oxidase (GOx) and the electrode surface. GOx immobilized on PMB@SiO2(nano) underwent a direct and reversible electrochemical reaction involving two-electron and two-proton exchange. A reagentless glucose biosensor using the nanocomposite modified electrode was developed. The calibration curve was linear over a glucose concentration range of 0.01–1.11mM with a correlation coefficient of 0.998 and a detection limit (3σ) of 3μM. The apparent Michalis–Menten constant, Km, for the enzymatic reaction was 0.50mM. The developed biosensor presented good accuracy, repeatability, reproducibility and stability as well as an excellent ability to resist interference from ascorbic acid and uric acid species. The investigation indicates that PMB@SiO2(nano) has a good potential for application in construction of the third-generation enzyme biosensor as a conducting matrix material.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.