Abstract

There is an increasing need for tactile shear sensors, particularly for medical applications such as orthopedic rehabilitation. Examples include measuring interfacial shear stresses between a residual limb and prosthesis to monitor socket fit and improve residual limb tissue health, and tracking shearing between a foot and shoe for assessing performance in athletes. However, there are considerable challenges in implementing shear force sensors for orthopedic applications due to the requirements for noninvasiveness, low mass, low power, and robustness against motion artifacts, normal force, and/or electromagnetic fields. To address these challenges, we designed, fabricated, and characterized a simple, low-cost, optoelectronic sensor that can measure multi-axial shear stresses. This novel sensor is based on a red, green, and blue (RGB) light-emitting diode (LED) projecting a cyclic illumination of RGB light onto a color pattern surface. As shear strain causes a displacement between the LED and the color pattern, the intensities of the reflected lights change due to the shift of the color pattern position. A photodiode captures the reflected light intensity at each color illumination, allowing the determination of the color pattern surface displacement and the shear along two axes. In this paper, we also report the efficacy of the sensor under benchtop testing conditions, confirming the potential of this technology for shear monitoring in orthopedic devices such as protheses or shoes. Future efforts will focus on miniaturization and packaging of the sensors, and characterizing their performance for the aforementioned medical applications.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call