An optimization strategy for die design in the low-density polyethylene annular extrusion process based on FES/BPNN/NSGA-II

Abstract

An optimization strategy for die design in the polymer extrusion process is proposed in the study based on the finite element simulation, the back-propagation neural network, and the non-dominated sorting genetic algorithm II (NSGA-II). The three-dimensional simulation of polymer melts flow in the extrusion process is conducted using the penalty finite element method. The model for predicting the flow patterns in the extrusion process is established with the artificial neural network based on the simulated results. The non-dominated sorting genetic algorithm II is performed for the search of globally optimal design variables with its objective functions evaluated by the established neural network model. The proposed optimization strategy is successfully applied to the die design in low-density polyethylene (LDPE) annular extrusion process. A constrained multi-objective optimization model is established according to the characteristics of annular extrusion process. The minimum of velocity relative difference, δu, and the minimum of swell ratio, Sw, that, respectively, ensure the extrinsic feature, mechanical property, and dimensional precision of the final products are taken as optimization objectives with a constrained condition on the maximum shear stress. Three important die structure parameters, including the die contraction angle α, the ratio of parallel length to inner radius L/Ri, and the ratio of outer to inner radius Ro/Ri, are taken as design variables. The Phan-Thien–Tanner constitutive model is adopted to describe the viscoelastic rheological characteristics of LDPE whose parameters are fitted by the distributions of material functions detected on the strain-controlled rheometer. The penalty finite element model of polymer melts flowing through out of the extrusion die is derived. A decoupled method is employed to solve the viscoelastic flow problem with the discrete elastic-viscous split-stress algorithm. The simulated results are selected and extracted to constitute the learning samples according to the orthogonal experimental design method. The back propagation algorithm is adopted for the training and the establishment of the predicting model for the optimization objective. A Pareto-optimal set for the constrained multi-objective optimization is obtained using the constrained NSGA-II, and the optimal solution is extracted based on the fuzzy set theory. The optimization for die parameters in the annular extrusion process of low-density polyethylene is performed and the optimization objective is successfully achieved.