An optical tire contact pressure test bench

Abstract

An optical tire contact pressure test bench developed by the IMMa group is described. The measurement system is based on the frustration of total internal reflection (FTIR) of light. The test bench allows performing normal pressure distribution and patch contact shape measurements on passenger car tires. The system is based on the use of a laterally illuminated glass on which the tire leans. Between them a plastic interphase is located that will cause the FTIR of light. A video camera catches the formed shining image through the glass. The brightness level in each pixel of the image can be related to the existing normal pressure. The study of the contact patch provided by the bench makes it possible to characterize tire behaviour under different loading states, inflation pressure, tire defects and toe and camber angles. The bench incorporates a computerized load and control system of the tire operation parameters, an image acquisition module and a data acquisition system that allow monitoring and acting on the experimental variables of interest in the tests such as load on the tire and environmental conditions. A supporting mechanical system incorporated to the bench allows providing the tire with variable toe and camber angles. From the images obtained with this system, the maximum normal pressure points, total force, size and shape of the patch can be determined, which are related to the tire-use conditions. As an application example, results that show the patch size and shape under different load and tire inflation pressures are presented. A further application, which is the use of the system for the detection and study of defective tires is also presented.