Abstract
An optoelectronic sensor was developed to measure the in-plane displacement between two parallel surfaces. This sensor used a photodetector, which was placed on one of the parallel surfaces, to measure the intensity of the red (R), green (G), blue (B), and white/clear (C) light spectra of a broad-spectrum light that was reflected off a color grid on the opposing surface. The in-plane displacement between these two surfaces caused a change in the reflected RGB and C light intensity, allowing the prediction of the displacement direction and magnitude by using a polynomial regression prediction algorithm to convert the RGB and C light intensity to in-plane displacement. Results from benchtop experiments showed that the sensor can achieve accurate displacement predictions with a coefficient of determination R2 > 0.97, a root mean squared error (RMSE) < 0.3 mm, and a mean absolute error (MAE) < 0.36 mm. By measuring the in-plane displacement between two surfaces, this sensor can be applied to measure the shear of a flexible layer, such as a shoe's insole or the lining of a limb prosthesis. This sensor would allow slippage detection in wearable devices such as orthotics, prostheses, and footwear to quantify the overfitting or underfitting of these devices.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.