An Irregular Tiled Array Technique for Microwave Wireless Power Transmission

Abstract

An irregular tiled array technique with the maximization of beam collection efficiency (BCE) for microwave wireless power transmission (WPT) is addressed in this paper, where the radiating elements are irregularly partitioned into multiple subarrays for reducing the number of radio frequency (RF) chain. The system architectures of WPT based on irregular tiled arrays are analyzed for the exhibition of its low-cost advantages. To achieve a good trade-off between the manufacturing cost and beampattern, a mixed-integer optimization problem (MIOP) accounting for the maximization of BCE satisfying the subarray tiling configuration, scanning direction and peak sidelobe level (SLL) constraints is established. By equivalently reformulating the beampattern, the MIOP in terms of subarray tiling configuration and subarray excitations is decoupled, and a two-stage solution method can be implemented. Firstly, resort to ‘generalized BCE’, the binary quadratic optimization problem (BQOP) for maximizing the BCE at considered scanning angles while guaranteeing the full aperture coverage is reduced to a binary second-order cone optimization problem. After the subarray tiling configuration is determined, the non-convex Rayleigh entropy maximization problem at a given scanning angle with respect to subarray complex excitations while satisfying peak SLL constraint is globally solved by using iterative convex approximation algorithm. Owing to the high efficiency of convex optimization, the BCE is able to monotonically increase to a stable value. Several numerical results with different array size and subarray shapes are provided to assess the effectiveness of the proposed method by comparing to the competitive counterparts in the open literatures.