Abstract
Lack of highly active and stable non-precious metal catalysts (NPMCs) as an alternative to Pt for oxygen reduction reaction (ORR) in the application of zinc-air batteries and proton-exchange membrane fuel cells (PEMFCs) significantly hinders the commercialization of these energy devices. Herein, we synthesize a new type of catalyst composed of nitrogen-coordinated and carbon-embedded metal (Fe-N/Fe3C/Fe/C) by pyrolyzing a precursor at 800 °C under argon atmosphere, and the precursor is obtained by heating a mixture of the tri (dipyrido [3,2-a:2′,3′-c] phenazinyl) phenylene and FeSO4 at 160 °C in a Teflon-lined stainless autoclave. The resultant Fe-N/Fe3C/Fe/C-800 exhibits the highest activity for the ORR with onset and half-wave potentials of 1.00 and 0.82 V in 0.1 M KOH, respectively. Furthermore, it also shows a potential ORR activity in 0.1 M HClO4, which is promising for the application in commercial PEMFCs. Most importantly, Fe-N/Fe3C/Fe/C-800 exhibits a comparable electrochemical performance to Pt/C for the application in zinc-air battery. The specific capacity approaches 700 mAh·g−1, and the maximum power density is also comparable to that of Pt/C at the current density of 200 mA·cm−2. The work opens up a simple strategy to prepare ORR electrocatalyts for zinc-air battery and PEMFCs.
Highlights
Exploring highly active and stable non-precious metal catalysts (NPMCs) as an alternative toPt for oxygen reduction reaction (ORR) is crucial to battery devices, such as zinc-air batteries and proton exchange membrane fuel cells (PEMFCs) [1,2,3,4,5,6]
The synthesis details were provided in the experimental section
We evaluated the performance of zinc-air batteries using Fe-N/Fe3 C/Fe/C-800-based air
Summary
Exploring highly active and stable non-precious metal catalysts (NPMCs) as an alternative toPt for oxygen reduction reaction (ORR) is crucial to battery devices, such as zinc-air batteries and proton exchange membrane fuel cells (PEMFCs) [1,2,3,4,5,6]. The Fe-N/C catalysts have been widely considered as the most potential candidates among NPMCs because of their high activity and durability [7,8,9]. They are mainly prepared by pyrolysis from the mixture of iron salt and nitrogen-containing carbon species [2,10]. The Fe-Nx are assumed to be catalytically active sites in these catalysts [11]. N-doped carbon, and these nitrogen-doped nanomaterials are catalytically active [12,13,14,15,16,17]. Iron particles and/or iron carbides are often formed in preparing the Fe-Nx catalysts during the Catalysts 2018, 8, 243; doi:10.3390/catal8060243 www.mdpi.com/journal/catalysts
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
