Abstract
Feasibility studies for recycling the recovered uranium from electro-refining process of pyroprocessing into a Canada Deuterium Uranium (CANDU) reactor have been carried out with a source term analysis code ORIGEN-S, a reactor lattice analysis code WIMS-AECL, and a Monte Carlo analysis code MCNPX. The uranium metal can be recovered in a solid cathode during an electro-refining process and has a form of a dendrite phase with about 99.99% expecting recovery purity. Considering some impurities of transuranic (TRU) elements and fission products in the recovered uranium, sensitivity calculations were also performed for the compositions of impurities. For a typical spent PWR fuel of 3.0 wt.% of uranium enrichment, 30 GWD/tU burnup and 10 years cooling, the recovered uranium exhibited an extended burnup up to 14 GWD/tU. And among the several safety parameters, the void reactivity at the equilibrium state was estimated 15 mk. Additionally, a simple sphere model was constructed to analyze surface dose rates with the Monte Carlo calculations. It was found that the recovered uranium from the spent PWR fuel by electro-refining process has a significant radioactivity depending on the impurities such as fission products.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
