Abstract
In this research, fatigue and induction heating thermo-mechanical fatigue (TMF) were performed on Hastelloy X superalloy in the small and large scale yielding in plane stresses mode. The crack growth rates were measured and formulated by fracture mechanics parameters. Furthermore, the fatigue life was predicted by employing resistance curves technique. The TMF behavior of this superalloy was investigated. The results demonstrated that in-phase loading TMF conditions lead to short fatigue life (more crack growth rate) at high strain amplitudes and temperatures up to 600°C. For higher temperatures, the predominant damage was due to creep. A model based on damage contributions due to pure fatigue and cyclic creep has been presented for predicting TMF crack growth rates. Fracture mechanic method was used to suggest a model for fatigue part of TMF crack growth rate, while the temperature effects during TMF crack growth rate was considered to be due to cyclic creep. In addition the TMF crack healing or crack closure occur during application of induced eddy currents were investigated explicitly, as environmental effects of induction heating. The results show the higher current density in the crack tip area produced more heat and resulted in a significant rise in temperature. So it was concluded that the compressive thermal stress due to change of thermal expansion causes crack healing.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
