Abstract
This work aims at demonstrating the feasibility of replacing Indonesian coal (INC) with hydrothermally treated municipal solid waste (MSWH) in cocombustion with high ash Indian coal (IC). The combustion efficiencies and emissions (CO, NO) of MSWH, INC and their blends with IC for a series of tests performed under a range of temperatures and air conditions were tested in a drop-tube reactor (DTR). The results showed the following. The combustion efficiency of IC was increased by blending both MSWH and INC and CO emission was reduced with increasing temperature. For NO emission, the blending of MSWH led to the increase of NO concentration whereas the effects of INC depended on the temperature. The combustion behaviors of IC-MSWH blend were comparable to those of the IC-INC blend indicating it is possible for MSWH to become a good substitute for INC supporting IC combustion. Moreover, the CO emission fell while the NO emission rose with increasing excess air for IC-MSWH blend at 900°C and the highest combustion efficiency was obtained at the excess air of 1.9. The existence of moisture in the cocombustion system of IC-MSWH blend could slightly improve the combustion efficiency, reduce CO, and increase NO.
Highlights
With the development of human civilization, municipal solid waste (MSW) turns out to be a great threat to the environment
At lower temperature (800◦C), the temperature and the other factors such as oxygen diffusion might come to play important roles on the combustion especially in the case of Indonesian coal (INC) whose η at 800◦C was extremely low compared to the others indicating that the high content of volatile matter (VM) of INC might discourage the diffusion of air which prohibits the oxygen from reaching the fixed carbon (FC)
MSWH contained much more VM than INC, its η at 800◦C was still well controlled by the temperature because the burning of VM was mainly responsible for the combustion of MSWH whereas on the other hand in the case of coal, the combustion of FC dominated
Summary
With the development of human civilization, municipal solid waste (MSW) turns out to be a great threat to the environment. Thermal treatment as incineration will play an important role as an effective MSW treatment which enjoys the advantages of outstanding reduction in waste volume, thermal destruction of toxic organic constituents, and so forth. It is hard to recycle adequate energy from the incineration of MSW with high moisture content, heterogeneous characteristics, and low energy content. Hydrothermal treatment (HT) is regarded to be an effective waste to energy technology for converting MSW into solid fuels with low moisture content, uniform characteristics, and high bulk/energy density [1,2,3,4,5]. We are running out of high-rank coals for power generations so that the utilizations of lowrank coals are inevitable especially in developing countries. Experiments were carried out with thermogravimetric analysis (TGA) and the results proved that hydrothermally treated MSW (MSWH) has the capability to promote the combustion of low-quality IC and Journal of Combustion
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
