Abstract
Fatigue, corrosion, and fatigue damage models are best addressed to improve and understand the service performance of materials, particularly automotive steel. This study is an attempt to experimentally and finite element investigates plain bending fatigue performance and damage model of DP 1000 sheet steel resistance spot welding (RSW) joints in 3% NaCl aqueous corrosive treatment. RSW applications were carried out using different weld currents. The joint samples were then subjected to optical image analysis, tensile shear, and fatigue tests (3% NaCl-aqueous and normal atmosphere). A proper damage model of RSW junctions was developed and corrected by numeric analysis. Besides, RSW nugget formation, tensile shear, and plain bending fatigue tests were also applied. Consequence, fatigue behavior, tensile load carrying capacity, and effective fracture behavior of resistance spot welded joint specimens were evaluated. Results showed that a corrosive environment negatively affected fatigue performance. With the developed model, it was observed that the fatigue life of the samples decreased by 30–35% in the fatigue tests performed in the corrosive environment. Experimental and numerical analysis results of plain bending were compatible.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
