Abstract
Lead alloys are used as permanent anodes for electrowinning of base metals such as copper. The corrosion of anodes is costly because of their relatively short lifetime, material cost, and their impact on cathodic deposit quality. Failure of anodes sometimes occurs before the predicted lifetime, having a negative impact on the efficiency and economics of the electrowinning process.This study investigates some recently failed lead alloy anodes. These failures occurred after a short period of service in a commercially operating electrowinning tank house. The samples were metallographically investigated with the help of an optical, three-dimensional microscope and a scanning electron microscope (SEM) equipped with Energy-Dispersive X-ray Spectroscopy (EDS) analysis. It is suggested that the reasons for failure are improper operational issues in the tank house, especially the level of manganese content in the electrolyte, which leads to unexpected corrosion.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.