Abstract

Development of innovative low-cost and efficient DSSCs (dye-sensitized solar cell) device for solar energy conversion is essential. In this present study, the performance of DSSCs based on graphene-titania (TrGO) photoanode using conventional N719 (synthetic dye) and natural green chlorophyll dye (organic dye) were extensively studied, analysed and discussed. TrGO was successfully synthesized via one step sol precipitation peptization technique using titanium (IV) isopropoxide (TTIP) and reduced graphene oxide (rGO) as starting materials. It was found that TrGO-2 exhibited the highest photocurrent generation among samples regardless of dye type. DSSCs device fabricated using N719 dye showed 9.15mAcm−2 of photocurrent with 3.95% efficiency whereas DSSCs device using natural chlorophyll green dye exhibited photocurrent density of 3.43mAcm−2 with 0.67% efficiency. From the Tauc plot, band gap was narrowed from 3.17eV of TiO2 to 2.78eV of TrGO considering the graphene extended the absorption range of the film to the visible light region. The main reason was associated with the better surface contact of the TiO2 dopants with the rGO film resulting in a lower charge transfer resistance.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.