Abstract
Experiments were conducted to compare the influence of temperature on the flow and strain-hardening characteristics of an Al-6061 metal matrix composite, reinforced with ∼20 vol pct of Al2O3-based microspheres, with the unreinforced monolithic alloy. At room temperature, the yield stresses and the strain-hardening rates are higher in the composite material in the asquenched condition and after aging at 448 K for periods of time up to 300 hours. The 0.2 pct proof stress and the strain-hardening rate decrease with increasing temperature in both materials, but the rate of decrease is faster in the composite so that the unreinforced monolithic alloy exhibits higher yield stresses and strain-hardening rates at temperatures in the vicinity of 600 K. Under conditions of constant stress at high temperatures, the composite exhibits both a higher creep strength than the monolithic alloy and higher values for the stress exponents for creep.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
